0800 / 720 5600

toll free from all
german networks

A regular power connection on site via a socket – that's all we need

Mounting is possible both outdoor and indoor.

The control unit automatically sets up the power consumption and reduces voltage depending on the humidity. In our humidity analysis, we have exactly determined how much moisture is present and what is the disturbance potential. This determines which voltage has to be used to eliminate the rising capillary moisture. In any case, it is limited to the low voltage range comparable to that of a doorbell power supply. Electromagnetic pollution is therefore not an issue.

For precise placement of anode conductors in the wall, we measure the water and salt levels. In individual cases, a very thin anode of precious metal can be almost invisibly introduced into a tile joint with the aid of special machines.

Because the Drymat®System, so as to ensure long-time protection from moisture, remains in your house even after the drying phase, we use only extremely durable electrodes of (m) titanium doped with a noble metal – the best we can find for you on the market.

In our humidity analysis, we have exactly determined how much moisture is present and what is the disturbance potential. This determines which power has to be used to eliminate the rising capillary moisture. In any case, it is limited to the low voltage range comparable to that of a doorbell power supply. Electromagnetic pollution is therefore not an issue.

If you have any questions about installation,

Contact Drymat